| Jackson Lake Dam | |
|---|---|
Jackson Lake Dam in June 1997 as seen looking upstream/west from the north shore of the Snake River. |
|
|
|
|
| Location | Teton County, Wyoming, in Grand Teton National Park |
| Coordinates | |
| Construction began | 1911 |
| Opening date | 1916 |
| Dam and spillways | |
| Type of dam | Concrete gravity with earth embankment wings |
| Height | 65 ft (20 m) |
| Length | 4,920 ft (1,500 m) |
| Crest width | 24 ft (7.3 m) |
| Base width | 72 ft (22 m) |
| Impounds | Snake River |
| Type of spillway | gated overflow |
| Spillway capacity | 8690cfs at 6790 ft |
| Reservoir | |
| Creates | Jackson Lake |
| Capacity | 847,000 acre feet (1.045 km3) |
| Catchment area | 1,824 sq mi (4,720 km2) |
| Hydraulic head | 42 ft (13 m) |
| Bridge | |
| Carries | Teton Park Road |
Jackson Lake Dam is a concrete and earth-fill dam at the outlet of Jackson Lake in northwestern Wyoming, USA. The lake and dam are situated within Grand Teton National Park in Teton County. The Snake River emerges from the dam and flows about 800 miles (1,287 km) through Wyoming, Idaho, Oregon, and Washington to its mouth on the Columbia River in eastern Washington. The chief purpose of the dam is to provide water storage for irrigation in the Snake River basin in the state of Idaho as part of the Minidoka Project. Jackson Lake is a natural lake but its depth was increased by the dam to provide water storage.
Contents |
The first Jackson Lake Dam was a log-crib dam constructed in 1906-7 across the outlet of Jackson Lake, a natural lake. That dam raised the lake level by 22 feet (6.7 m), but the dam failed in 1910. An new concrete and earthen dam was constructed in stages between 1911 and 1916, raising the maximum lake level to 30 feet (9.1 m) above the lake's natural elevation, providing a storage capacity of 847,000 acre feet (1.045×109 m3).[1] The new dam was designed by Frank A. Banks, who would later supervise the construction of Grand Coulee Dam.[2]
The reservoir was created by damming the outlet of the natural glacial Jackson Lake, with the additional height creating a storage pool for the Minidoka Project, which provides irrigation water from the Snake River for farmlands in Idaho. Jackson Lake stores and releases water which is collected by Minidoka Dam and American Falls Dam more than 100 miles (160 km) downstream for diversion to distribution canals.[1][3] At the time of the dam's construction, Jackson Hole and the Teton Range were as yet unprotected from development. Grand Teton National Park was established in 1929, and excluded Jackson Lake. The lake was incorporated into Jackson Hole National Monument when it was proclaimed by President Franklin D. Roosevelt under the Antiquities Act, and became a part of Grand Teton National Park win 1950 when the park was expanded to encompass the national monument lands. When the dam was built there was no attempt to clear the shores of the lake of standing timber, resulting in an unsightly band of dead trees when the waters rose. This vista, and the mudflats created by drawdown of lake waters, were cited in later years in successful arguments against reservoirs in Yellowstone National Park.[4][5]
Construction personnel for the dam were housed at a temporary camp that dwarfed the nearby town of Moran, Wyoming. Supplies came in from the Grassy Lake Road north of the park, which runs west into Idaho to meet the nearest railhead at Ashton, Idaho.[6]
The U.S. Bureau of Reclamation conducted studies on dams in 1976 and determined that Jackson Lake Dam was susceptible to failure in case of an earthquake of magnitude 5.5 or greater. The dam was upgraded during 1986–1989, and the Bureau of Reclamation now believes it can withstand the “maximum credible earthquake,” a magnitude 7.5 quake on the Teton fault.
The dam is owned and operated by the U.S. Bureau of Reclamation, which maintains the water level above the lake’s natural elevation for downstream irrigation.
|
|||||